GTE TT going XSPOWER single kit!

[Gearhead]

head came off to get a complete freshen up, with a 3 angle valve job, and decided to go big single with about 500 wheel in mind.
had the stock injectors sent out to rc to have them gone thru.
and started collecting peices for this thing. the stock twins was hosed anyway, dragging the housing and all.

so this is how this is starting out!
http://i5.photobucket.com/albums/y196/gearhead559/toyota%20section/100_4628.jpg

http://i5.photobucket.com/albums/y196/gearhead559/toyota%20section/100_4631.jpg
off

junk
http://i5.photobucket.com/albums/y196/gearhead559/toyota%20section/100_4630.jpg

dont get me wrong the stock twins work nice down low, but f working on that setup. hell i had to pull the head to get them off any way!:out:

whats this?
http://i5.photobucket.com/albums/y196/gearhead559/toyota%20section/100_4512-1.jpg

goodies !
http://i5.photobucket.com/albums/y196/gearhead559/toyota%20section/100_4633.jpg

back together, and mocking up the turbo kit!
http://i5.photobucket.com/albums/y196/gearhead559/Shop%20stuff/100_5618.jpg

had to shorten 2 studs, and do my oil lines and so on

but i got that all sorted out, and put the waste gate on, and made one of my famous harley header blow down tube.lol
http://i5.photobucket.com/albums/y196/gearhead559/toyota%20section/100_5852.jpg

started fitting some of the ic tubing!
http://i5.photobucket.com/albums/y196/gearhead559/toyota%20section/100_5855.jpg

http://i5.photobucket.com/albums/y196/gearhead559/toyota%20section/100_5854.jpg

ordered the rest of the pieces for this thing since im missing so much , and hoping to have this thing mostly together by next week once parts start coming in

[George89]

whats your parts list so far? as 500 hp is what am after as well