supra 93 na whit no terminal 66

[supra93jdm]

On my 93 Supra, I don't have a wire in the Terminal 66, it's a JDM Supra. So where do I plug the white and yellow wires? I am installing a SAFC2.

Thanks a lot for your help

[JEJEH]

like me :dunno:
it's because we are no MAF in our car.

airflow signal is the maf signal. j-spec do not have them. your setup will be pressure and not karmen. so if you have a map sensor and not a maf then take the signal wire from the map, cut it and one side goes to white and other to yellow. so map signal to white and yellow to ecu.
well,just do ok rpm is pin 58, throttle is 43, ground is 69, ign power is 31 and the pressure signal for the yellow and white is 62