Mapecu 1 + mkiv na-t

[dlzz]

Alright im installing a mapecu1 into my 95 mkiv na-t pretty soon. I bought the mapecu to get rid of my MAF, and convert the car the speed density (with a MAP sensor). Is this possible with the MAPECU1?

If so, how and where do I install the map sensor?

Thank you

[sc300_704]

i'm not sure about the map ecu 1 but i do know that the map ecu 2, the map sensor is built inside the map ecu itself. so basically you just run a vacuum hose from map ecu to the intake manifold.

[dlzz]

i'm not sure about the map ecu 1 but i do know that the map ecu 2, the map sensor is built inside the map ecu itself. so basically you just run a vacuum hose from map ecu to the intake manifold.

Alright thanks, anyone have any MAPECU1 input?

[dlzz]

i'm not sure about the map ecu 1 but i do know that the map ecu 2, the map sensor is built inside the map ecu itself. so basically you just run a vacuum hose from map ecu to the intake manifold.

Where does the vacuum hose connect to the intake mani? Do I have to drill a hole (or do any modification), or does it fit in a stock location?

[albert92078]

I believe u can just tap into one of the vac hose on the mani. like the one from the FPR or the PS.

[Importsnrice]

Bump. How does the MAP work with MAPECU1?

[Still_Spinnin]

It's the same as a 2 with the vacuum line coming from it. I need the software to be able to adjust mine.

[hybelkaninen]

Hi guys,
can i run the MAP ECU 1 with my JDM (MAP based) Na-T setup? i need some sort of fuel controller for bigger injectors but cant decide which to go for, im thinking of going with either the AEM FIC and a TT MAP sensor or a MAP ECU 1, any input is much appreciated