PDA

View Full Version : It's finally here, the 1/2uz-fe - V160 clutch/flywheel kit!

cowboy bebop
06-09-2006, 10:50 AM
The finished product is finally here! Quarter Master has been so gracious to create a limited run of these top shelf 1/2uz-fe to V160 clutch/hese flywheels. These come in a dual flywheel configuration and are rated to 800ft/lbs tq. What makes these so special is that they are 100% bolt on to the 1/2uz-fe, and also to the V160. They even use the stock slave cylinder! This set-up is meant to be coupled with the TTC Performance V160 adapter

Best of all, where the stock Supra flywheel weighs in at a whopping 54lbs, and the HKS triple plate at 34lbs, this entire kit weighs only 19lbs! On with the pictures..

http://i15.photobucket.com/albums/a355/c0wboy/IMGA1001.jpg
http://i15.photobucket.com/albums/a355/c0wboy/IMGA1002.jpg
http://i15.photobucket.com/albums/a355/c0wboy/IMGA1003.jpg
http://i15.photobucket.com/albums/a355/c0wboy/IMGA1004.jpg
http://i15.photobucket.com/albums/a355/c0wboy/IMGA1005.jpg
ranger2339
06-09-2006, 10:54 AM
Thats a fricking clutch!! Wow!! How much??


Josh
cowboy bebop
06-09-2006, 11:21 AM
It's tough as nails and the quality is unsurpased. The cost is $1499.00 for everything you see there, which is a Bargain considering they only make 2 at a time. This is about as custom as you can get.

We expect orders to be backing up very soon (I have one orer to place this week) so if this is something that you know you're going to be going with, you may want to consider placing it early. This particular example is going out to a customer up north for use with the TTC 1/2uz - V160 adapter

Thanks Ranger,

Eric
00750
06-09-2006, 12:05 PM
Now thats impressive.
NinetyFiveNA
06-09-2006, 08:46 PM
So when do you plan on getting "making" more adapter plates? Last I heard there was one left... kinda defeats the purpose for someone like me to order a clutch like this when there are no more adapter plates right now...
cowboy bebop
06-09-2006, 11:08 PM
Right, there is one left from the original batch. I wil make more later on, but we can always do one at a time.

Eric
badsupra
09-06-2007, 10:23 AM
would this fit a 5 speed tranny?
440Charger
11-04-2007, 01:32 PM
will this fit the r154?
cowboy bebop
11-09-2007, 05:50 PM
No, the spline patternis different. The adapter will, but not the clutch.

Eric