SALE: FULL TURBO BACK TRD GEN2 3" Exhaust Systems & Down Pipe

[98mkiv]

Sale: $415 Catback, $495 Turbo back (DP for STOCK TWINS) - SHIPPED

LIMITED QTY In stock now

Take a look at these polished stainless cat-back exhausts, compare to TRD GEN2. These are a virtually straight exhaust, very low restriction, modeled directly from the flow path of the TRD GEN2. Nice low rumble at idle, and a great sound when you get on the gas. CNC mandrel bent, Robot welded. Lifetime warranty. Hardware and gaskets are included. These are custom made for me by Motoria in Korea. Motoria is the OEM supplier for Cusco, Subaru and others..... you will not be disappointed with the quality! The look is subtle, not rice!

These are now available as a full TURBO BACK - and include a polished stainless 3" downpipe for direct bolt on to the stock TT turbos. The DP is also perfect for modifying for the T61 turbo kit to delete the stock cats.



http://i68.photobucket.com/albums/i9/98mkiv/GTE%20kit/Picture414.jpg

http://i68.photobucket.com/albums/i9/98mkiv/GTE%20kit/Picture415.jpg

http://i68.photobucket.com/albums/i9/98mkiv/GTE%20kit/mk4.jpg

http://i68.photobucket.com/albums/i9/98mkiv/GTE%20kit/DSC03348.jpg

http://i68.photobucket.com/albums/i9/98mkiv/supra_for_sale/DSC03628.jpg

[adversary]

How does it sound?

Do you have any sound clips?videos?

[98mkiv]

beauty is in the eye of the beholder, right? I think it sounds great, but you will have to get an unbiased opionion from someone else when they install it on their car. It has a nice mean but subtle idle, and when you get on the gas it's a good sound. I love the sound of it in tunnels and under bridges, on the highway it's pretty sedate.

Try one..... ;)


http://www.youtube.com/watch?v=_1yRJ-bStyA

and another, [I really need to figure out how to convert mpegs]

http://www.youtube.com/watch?v=Ujk7YMAcyV0

[soarerflame]

what with the cock rings for the hangers? It fits the SC300 but requires you get a universal hanger from autozone for the rear and thats about it.

[98mkiv]

what with the cock rings for the hangers? It fits the SC300 but requires you get a universal hanger from autozone for the rear and thats about it.

:lol:

The cockrings are what the stock TRD GEN2 has on them and that's also what the OEM exhaust has on it. I did mention this is for the supra, so install on the SC300 at your own peril - Amir, you're a madman!

[laxdude362]

LOL! COCK RINGS!!! I was there the night we made up that word. Funny shit.

[soarerflame]

if you are thinking of modifying this to fit an SC300 this is what needs to be done

Hammer the spare tire wheel well a little bit
You need to exted the exhaust just a little bit a better way to do this is to get a megan racing down pipe and change the 3" bolt football flange to fit your downpipe or fit your stock precat. You may need to fix the hangers a bit to make sure it fits perfectly.

thats about it.

[98mkiv]

we'll be hitting the dyno early next week.... will get a sound clip for you.

[soarerflame]

Here is a pic of the exhaust on an SC the rear is not hung right yet still trying to figure out the final fitment:

http://i8.photobucket.com/albums/a23/afrikanflame/TurboKit/100_3635.jpg

[98mkiv]

Amir, I did not know that you could adapt this to a SC300, that is good to know. Is it possible to tuck it up a little higher, it appears it's a little low..... I know the original hangers had it tucked up higher on the supra, but on the SC300 all bets are off, since this is uncharted territory. What do you think of the quality assuming you were putting it on a Supra?

Great work Amir, hope the hand heals up quick, that was a tough break.

[dejacky]

Nice work Kirk :thumbup: . Any chance we could get a SC300 Dual exhaust bolt on? :)

[98mkiv]

I'd like to say yes, but I don't see it happening in the near future. Competition from HKS/Greddy/etc is too tight. They are lowering their prices in response to competition. Exhausts that they used to sell for $1000 are now $600. So coming into the game with a $350 exhaust is good for the Supra market, but the SC300 has too many choices. If you have ideas, I'm all ears.

[soarerflame]

In all honesty the SC market has none. Mosltly custom setups that look like crap and sound like freight trains. So I would definately recommend a dual setup for the SC.

[98mkiv]

It's something XSPower has been rolling around for a while, it may happen at some point. Right now, it's not something that has high a priority as other projects I have.

[dejacky]

I'd like to say yes, but I don't see it happening in the near future. Competition from HKS/Greddy/etc is too tight. They are lowering their prices in response to competition. Exhausts that they used to sell for $1000 are now $600. So coming into the game with a $350 exhaust is good for the Supra market, but the SC300 has too many choices. If you have ideas, I'm all ears. I wasn't aware HKS/Greddy were selling dual exhausts for the Lexus SC300's for $600. Link? Yes, I do have some ideas for cheaper SS exhausts for the SC300 we can discuss on AIM :dancingco .

[98mkiv]

you know where to get me dejacky! I am always open to suggestions, and ideas for new products.

[Archanox]

Exhaust looks great, do you have some pictures from the side and straight from the rear? i want to see how low it hangs

[Archanox]

Hi 98mkiv, forget my request about the pictures, can you deliver the exhaust to me before the weekend?
Urgent!

[98mkiv]

natuurlijk, mar't is echt duur.

I could, but the shipping would be quite expensive, I can see what the cost is.

If you order tuesday, you should have it by next wednesday with standard shipping, but to have it by the weekend will be pricey. PM me or email me your full address and phone number and I will get you a qoute.

[Archanox]

Thanks for your quick response! we will take handle it further by PM :)

[twistedmethod333]

I love everything about mine, I am pretty much the only chearleader on supraforums....no one else will try it.

However, I would substitute the OE Toyota Rear rubber hangers for whatever is on there now. One of mine snapped from rubbing on the metal hook it attatches to. The OEM units are alot more durable, but cannot be fit under the hanger arm on the muffler without bending it.

[98mkiv]

There are a lot of these out there, but they just don't pop up very often. For whatever reason, a lot of people don't post up once their parts are installed, regardless whether its an exhaust, or a kit, or whatever. They are out there, and you're not alone.

Thanks for the compliments.

Mark

[alansupra94]

I would like to buy this exhaust but who do i talk to and send the money too....i live in NJ so i dont think shipping will be too bad

I cant wait to put it on with the NA-T kit

[mwsupra23]

I was wondering if this exhaust is still available and if so is the price still the same as above shipped. Also - about how long does it take to get it shipped to VA.
Thanks

[98mkiv]

it is available and you can get it in time for the holidays too.... Shipping is $20 and takes about 2-4 days to get to VA via FedEX.

Send paypal to jmmx22@hotmail.com to order.

Thanks,
Mark

[mwsupra23]

are you offering any x-mas sales for this exhaust other then with the turbo kits

[98mkiv]

BAH-HUMBUG. no.

[soarerflame]

any new updates for the SC300 wanting to rock duals?

[98mkiv]

not happening.....

[craaaazzy]

hey mark,
do you know what the measurement from whole to whole is on the flange? i'm going to install a cat/test pipe and need to buy some flanges that will fit this. let me know. tia.

[98mkiv]

standard 3" football flange works, I will have to measure for you. Give me a call at 603-674-3468 and I'll take a walk out there with some calipers.

Thanks,
Mark

[craaaazzy]

thanks mark, just wanted to make sure before i went out to get some.

[dinhnerz]

Any more information on this exhaust on a SC300? Looks like it sits kinda low.
I'm in the market for an exhaust for a SC.

[98mkiv]

there is not enough of a call for the SC's..... :(

[ezzejacobs]

Hey Mark, I had pmed you awhile back and I just wanted to ask again if you were thinking about making a setup for the IS? I would be willing to be the test car. Just a little back ground on my car-

I have a 2002 Silver (MSM) IS300 Turbo. Heres a list of the parts:

PT 67 Ptrim
PTE 720 CC injectors
TT internals and HG
3" dp and mp
Modified stock fuel rail
2.5" IC piping
21"x12"x3" intercooler
V160
RPS clutch and f/w
modified stock drive shaft
3" custome exhaust w/ magnaflow can (no resinator or cat)
Haltech Standalone w/ 3 bar map
GM AIT sensor
Greddy gauges (Boost, EGT)
AEM uego wide band
Greddy EBC profec BII (pos!!)
Greddy TT
Walbro 255 fp
TE fuel return setup (soon to come 2nd pump and feed)
Stock ignition (soon to come HKS DLI)
Stock TB (soon to come LS400 80mm)
19x8.5 and 9.5 TSW thruxtons
BFG KDW2s 235/35 and 265/30
http://i113.photobucket.com/albums/n204/ezzejacobs/DSC02454.jpghttp://i113.photobucket.com/albums/n204/ezzejacobs/DSC02449.jpg
http://i113.photobucket.com/albums/n204/ezzejacobs/DSC02450.jpghttp://i113.photobucket.com/albums/n204/ezzejacobs/DSC02284.jpg
http://i113.photobucket.com/albums/n204/ezzejacobs/DSC02294.jpg
More to come... LS400 front brake setup lighter and bigger, 30lbs hoping to be around mid to high 6xx's on c16, possible meth setup, rx7 wheels w/ ET streets....

Pm me if your interested in working on something for us IS300 guys because I will get the word out and possibly have several people interested if at the right price.

Thanks,
Eric J.

[98mkiv]

very nice setup. I'd need a stock exhaust to work from for fitment - and I need a local IS. Local IS is not a problem at all....

I don't know that there is enough interest to do this one though...... if I knew there was good solid interest I could come up with something nice.

[ezzejacobs]

Well tell me where your at and I can see if we can get a local IS over to you. Also about the stock exhaust, are you looking for the header back or the rear section? Let me know and if I can find enough people interested I think you could do well on this. As I know a few companies already making one, but I think its like 600+ or so. Also, I think from the midpipe back or rear section + B pipe would be the best and probably cheapest option.

Eric J.

[98mkiv]

Like I said, getting a local IS is no problem....

[toykilla]

Has anyone tried it on a SC300? Fabbing an extension pipe seems like an easy task.

[98mkiv]

Its been done on the sc300... just bang on the spare tire bulge a little!

[98mkiv]

ONLY 10 LEFT in stock.

[Supraristo]

Just for your info....these replicas are of the GEN 1. The Gen 2 had an oval can, not round.

[98mkiv]

NO. they are of the GEN2. Yes, the Gen2 has oval and this round, but the volume of the can and the piping dimensions/run is the same as the gen2. Making the oval can would result in a lawsuit from TRD. This is as close as the law allows.

[Supraristo]

ICIC...whats the price of these? what's the DB level? Cuz here in Cali, popo has stopped me for my Greddy PE which is really quiet.
Thanks

[98mkiv]

I don't answer the DB level questions..... cause I don't want to hear about it later. Price right now is $375 Shipped for the catback and $475 shipped for the turbo back (stock twins DP).

[Brown Duckz]

Good price, what's the quality like on the downpipe? Comparable to RMM? I want to run the turbo-back exhaust as long as the DP is good shit. :)

[98mkiv]

Quality is excellent, everyone likes them. The DPP is a RMM clone designed to fit stock twins as the original does.

Mark

[ocerrahyan]

anyone have a pic of this on an SC?

[supra278]

will this exhaust work ok with an NA? hopefully in the next year being NA-T. I dont want to totally over kill my NA torque.

Thanks,
Brien

[98mkiv]

Yes, the $350 catback fits the NA perfectly. Sounds nice too.

[Bboy_Trevstuh]

Still got some?

[98mkiv]

Yep, in stock, ready to ship.

[ZSC3]

how many SC's would you need to start the product? i am looking into buying a dual set up for when i go turbo

[98mkiv]

not doing the SC. We'd need 50.... ;)

[supra278]

SO this will bolt right up, after i take my stock exhaust off... No mods?

[98mkiv]

that is correct, true bolt on.

[craaaazzy]

just wanted to let everyone know...i bought one but recently sold to another sc300 owner. he mentioned he only need to extend it a bit. he dropped by the other night and it sounded great. if i didn't keep my stock exhaust, i would have kept it. good exhaust for the $.

[LUV2XLR8]

I feel like taking the attempt to run a dual exhaust (on a SC300) with this setup... How do I plan on doing this? Well, the Supra Bpipe turns towards the left (when looking at the car from the rear) and I am assuming by rotating the 2nd Bpipe and changing the hanger position, I can obtain an exact match, so that both mufflers are even and match... Hope that made sense....
Mark, any input?

hopefully this will make it clear:

- purchase 2 kits (both bpipes turn towards the left)
- Install the 1st kit on the drivers side
- Install the 2nd kit on the passenger side (by rotating the bpipe and changing the hanger location)

[98mkiv]

This is interesting, I think with a little welding it would be pretty straight forward. I can include some extra 3" polished stainless piping with your order so you have the material to make a splitter.

[jr12]

Yes, the $350 catback fits the NA perfectly. Sounds nice too.

Hey mark do you still have any left? And how much would the DP be if I buy it seperatly later on. Im planning on buying your t61 kit for a 94 n/a supra soon but want to start w/ the exhaust.

Also, is the price 350 shipped?

[98mkiv]

I have plenty in stock now. The on it's own is $135 shipped. $350 is a shipped price, and if ou get it with yoru T61 kit, it's $300.

Thanks,
Mark

[jr12]

I have plenty in stock now. The on it's own is $135 shipped. $350 is a shipped price, and if ou get it with yoru T61 kit, it's $300.

Thanks,
Mark

Thanks for the reply Mark. Ill probably just order everything I need at once then. The turbo kit, piping kit, and DP/exhaust combo.

[98mkiv]

no problem, sounds like a plan to me.

[supra278]

Got my exhaust yesterday! and it felt like another X-mas unwrapping all the packing material! Took me about an hour to install my self... Had some trouble getting one bolt undone from the cat (rust/stuck) but after that install was a breeze! As soon as i turned that key.... my eyes lit up! Rrrrrrr rumble.... man it really does sound sweet! I drove by the local Starbucks, and about 20 people were rubber necking as i cruised by!

This is a great exhaust! Looks perfect too!

Thanks Mark!

[Suprasonic]

Does the dp connect to the turbo dp from your kit if the flange is cut off and replaced with the football style flange? Any pics of it?

[Turbology]

Very nice-looking exhaust. Any idea if it will fit a 1JZ in an SC300?
:)

[amorphous]

hi mark how much for a turbo back exhaust for a 92 sc300? have you done one for an sc? I have your 61 trim turbo and down pipe

edit-
nvm actually saw that it will fit with a little fab work. Looks great could i have quote shipped to 20879?

[98mkiv]

sorry, none for the SC specifically..... It's $365 shipped to you in 20879.

to order send paypal to jmmx22@hotmail.com

[100mgbluepill]

Someone needs to make a video!

[sdsport92064]

Mark, thanks for taking the time to help me out on the phone yesterday. To refresh I'm the one getting the TT motor delivered hopefully by next week and since I have an NA I will need some parts. I have some more Newb questions, sorry.

The full turbo back system that I was asking about- does this mean I effectively have no cats at all? Or do I need to purchase some pieces of the TT exhaust so that this will all bolt in? If I do need some of the stock exhaust, which pieces do I need?

I also hope to be able to pass a "if I get pulled over" quick visual so I'd want at least one cat in the system.

Thanks again, when the TT comes in I'll take a quick inspection of it and then place my order.

[98mkiv]

You can keep your stock cats (both of them) and run only the catback, or you can order the full turbo back system and have a cat added (I can do this for you at extra cost, but it is probably cheaper at your local exhaust shop to add the cat).

Keep the questions coming, that's why we're here :)

[sdsport92064]

You can keep your stock cats (both of them) and run only the catback, or you can order the full turbo back system and have a cat added (I can do this for you at extra cost, but it is probably cheaper at your local exhaust shop to add the cat).

Keep the questions coming, that's why we're here :)

Actually, I don't have any TT cats at all, the motor I bought doesn't come with them attached. But I think what you're saying is

1. If I elect to have not cats... then the full turbo back system works and I'm completely non-smog compliant, or

2. If I want to pretend I'm legal... then I have you add a cat, or

3. If I want to really be legal... then I buy the 2 factory cats from someone and only buy your catback system.

What if I still want to run the downpipe? What do I need then?

Golly I'm a newb.

[98mkiv]

you have it all right.... If you want to have the DP then get a 3" cat and have it welded into the DP. Any exhaust shop can do this.

[sdsport92064]

Another out-of-the-blue question. I have a Modellista Designs diffuser and I'm looking at how fatty the muffler itself looks. For some reason I thought it was an oval not circle design. Any idea if the diffuser will fit under this thing? I really like the idea of a quiet exhaust but I'm just wondering if it will work.

[98mkiv]

should fit fine.

[snomangsx901237]

Any one ever finish the dual exhaust for the sc300?



Sidenote: Tanabe just released a dual exhaust setup looks really nice. Mark you should look into making your version of it. I guarantee it will sell. I definitely would get one.

[98mkiv]

No sarcasm, but the same thing was said about the intake manifolds, etc.....

What is the street price on the tanabe?

[Illusive MA70]

is the exhaust kit still available? out of stock?

[98mkiv]

no stock. will update when it is available.

[alex8181]

Is this back in stock yet?

[98mkiv]

The exhaust will be in early next week. Prices may be changing a bit.

[Illusive MA70]

price changing for better or worst? also redesigned? same?

[98mkiv]

Well, there is no way its going to get cheaper...... ;) The pricing increase is mainly for fedex as they have really increased their prices lately.

Mark

[alex8181]

Hopefully not too much more, still I am very excited to hear when these will come back in stock.

[98mkiv]

price is $425 shipped....

[sjevo]

In stock yet?

[98mkiv]

went out of stock already, but I have one that is iffy, the order is not yet completed.

Mark

[Illusive MA70]

you sold out of these that quickly? is someone buying bulk?

[98mkiv]

back orders

[RLSUPRA]

You can keep your stock cats (both of them) and run only the catback, or you can order the full turbo back system and have a cat added (I can do this for you at extra cost, but it is probably cheaper at your local exhaust shop to add the cat).

Keep the questions coming, that's why we're here :)

Mark,

Can you suggest a good not to costly 3" hi-flow cat if I was to do it on my own?

Can you also quote me on doing it for me?

Thanks,
RL

[98mkiv]

best bet is get a metal cat on ebay or jegs.... I cannot install it for you, unless you were here.

Mark

[RLSUPRA]

what I meant by installation was the welding of the hi-flow cat to the dp on the turbo back system.

[98mkiv]

Yes, I know.

[Illusive MA70]

next batch???

[turbo_IS]

does this work on the is300..

[98mkiv]

No, it does not, sorry.

[turbo_IS]

What exhaust are there out there like this one..

[98mkiv]

TRD GEN2 (discontinued)

[turbo_IS]

Is there any for the IS..?

[98mkiv]

nope, sorry

[supra278]

Got some pictures of Mark's Exhaust. This truly is a smoking deal! I get people at car meets asking me all the time what my exhaust is and how sweet it sounds.:dancingco
http://i29.photobucket.com/albums/c261/supra69/PICT0702.jpg
http://i29.photobucket.com/albums/c261/supra69/PICT0758.jpg

[pasionm]

Whats the ETA on exhaust?

[98mkiv]

I have one in stock.

[marcsupra]

how much for this exhaust shipped to my door in Canada postal code J8M 1S2??? and does it fit on N/A??? do I need any modifications or its bolt-on??

[98mkiv]

PM sent.

[LUV2XLR8]

anyone know where I can get a midpipe already made to mate to the downpipe off a T61 kit?

[98mkiv]

PM suprachic - she was able to source one. The DP fits to the stock cat.

[LUV2XLR8]

Thank you sir!.. will do!

[Suprasonic]

-Mark
Are there anymore in stock? Looking for a full turbo back system..

[98mkiv]

no, none in stock now.

[chopstickz]

i'm looking for a catback mark. pl

[98mkiv]

I have them in stock, price has increased though, $430 shipped.

[chopstickz]

aww....

[Suprasonic]

I have them in stock, price has increased though, $430 shipped.

Is this the price for the full turbo back system??

[98mkiv]

This is the catback system.

[Suprasonic]

Ok so how much for full turbo back to 21009?

[98mkiv]

full turbo back is for the TT only. It can be used with the NA-T but you will need to modify the included midpipe. The price is $510 shipped.

[chopstickz]

how much modification is needed to make it work? i'm very interested as I just cut my midpipe in frustration today because of stripped bolts.

[98mkiv]

You'll need to take it to an exhaust shop and have a 3" football flange welded on and then it mates to the NA-T DP. Next time cut the bolts, not the pipe.

[chopstickz]

nah, i was going to change it anywys lol. i don't like my cheap ass custom catback i bought with the car. Do you have the 3" football flange? Or should I use the one on my midpipe? Also, when will you get those 7psi springs in again?

[Suprasonic]

full turbo back is for the TT only. It can be used with the NA-T but you will need to modify the included midpipe. The price is $510 shipped.

I have a '95 TT. Does the dp have a bung for the factory sensor? Any pics of the dp?

[chopstickz]

mark?

[98mkiv]

Sorry, Yes, it has the sensor mounts. I will locate some pics.

[marcsupra]

Hey Mark are the catbacks still available??

[98mkiv]

yessir they are :)

[snomangsx901237]

How many do you have left?

[98mkiv]

enough :0

[artbran]

Do you have these in stock?

[98mkiv]

Yes, they are in stock and ready to ship.

Will do $400 for catback and $485 for complete TT turboback.

Mark

[89ma70]

Would u sell just the 3" DP for the stock twins?

[almrlon]

Is there a DP for an IS300 that someone reccomends here? I just got my XS kit and i dont want to go 3" all the way back as i want to avoid the noise and keep the stock exhaust as well...ANY SUGGESTIONS????:wink5:

[98mkiv]

You can have an exhaust shop cut the flange off your stock header and weld it to the DP so you can keep the cat and it becomes bolt on.

[ksnippy2]

hey mark is this the same one thats listed on the xs-power website? thanks

[98mkiv]

No.

[ksnippy2]

No.

oh i thought the catback exhaust itself was the same since they are both made by motoria, are pictured the same, and are trd gen 2 replicas.

[Mr Ree NZ]

oh i thought the catback exhaust itself was the same since they are both made by motoria, are pictured the same, and are trd gen 2 replicas.

Not to mention the price difference, its huge? Why do loyal forum members have to unknowingly pay more for the same product when buying through this forum rather than the xs power site? Normally discounts are offered to members of communitys but it is clear in this instance its quite the reverse.

[ksnippy2]

Not to mention the price difference, its huge? Why do loyal forum members have to unknowingly pay more for the same product when buying through this forum rather than the xs power site? Normally discounts are offered to members of communitys but it is clear in this instance its quite the reverse.

yeah thats why i was questioning it..the price could have dropped since the making of this thread though :dunno: but it would help if the price was updated on here.

[98mkiv]

Sorry, price should have been updated, the price is $325 for the catback here, cheaper than on the website.

[ksnippy2]

Sorry, price should have been updated, the price is $325 for the catback here, cheaper than on the website.

thats a great price! ill probably be ordering one soon. also does that price inclde shipping?

[98mkiv]

yes.

[boostinsc]

Can this work on the sc300 without hammering the spare tire well in? Also how low does it hang?

[98mkiv]

Nope, need to make some minor mods. Doesn't hang toooo low.

[saleengtroush]

Any other sound clips ?? Like driving or from the back instead of from the front ?

[saleengtroush]

Mark ?

[98mkiv]

sorry, I have no other sound clips.

Thanks,
Mark

[albert92078]

Hey Mark do you still have these exhaust in stock?

[98mkiv]

yes

[albert92078]

ok cool. will be picking up one soon! :) does it come with all the nessesary hardware? like bolts and gasket??

[albert92078]

hey mark whats ur paypal address?

[98mkiv]

mark@clubna-t.com

[albert92078]

Payment sent for catback exhaust.

[albert92078]

Hey mark can u pm me the tracking number? thanks :)