Can you provide me with a wastegate???

[jzpower&associates]

I have the NA manifold and I have been searching for a wastegate lately and I am not really sure on what to get and in my last thread you told me I had to get a more of a square pattern. I am looking on the lines of a 44mm wastegate. Can you provide me with one? I know that you guys sell the same manifold that I have (ssautochrome) and was wondering if you could sell me a wastegate because i trust you guys more than the people on ebay. I am in dire need to complete my NA-t! If you could help I would appreciate it a lot! thanks

Brendan

[98mkiv]

yes. give me a call at 603-674-3468.

thanks
Mark

[jzpower&associates]

I have tried calling but no one answered, I need this wastegate soon!!!

[98mkiv]

have you left a message, i have'nt gotten any messages to return.

[jzpower&associates]

yea i left a message for you, are you sure that number above is the right number? I called like 4 times but got the voice message each time.

[98mkiv]

that's my number, yes. 603-674-3468. I will check to see if something is up with the phone.

In the mean time, did you get the manifold from XSPower or SSAC on eBay? I need to know so I can point you to a link for the right one.

Thanks
Mark

[jzpower&associates]

Hey Mark, I got my Manifold a long time ago on ebay from SS autochrome. It appears that I have the flange for the wastegate to be the more of a rectangular shape than the GTE manifold. Could you still try to find me one? thanks for your helf!

Brendan

[98mkiv]

yessir, just give me a call. Please take a picture of the flange on the mani and email it to me, I will make sure you get the right one. Email the pic to me at jmmx22@hotmail.com or post it here.

Thanks,
Mark

[jzpower&associates]

ok i sent the picture of the flange, i will give you a call tomorrow. thanks

[98mkiv]

I got the pic, I will get you an answer today when you call, my network has been down till right now.

[jzpower&associates]

hey mark, payment was sent. please comfirm you got it. thanks agian!

[98mkiv]

yes, got it, will ship tomorrow when I return from my trip.

Thanks,
Mark

[jzpower&associates]

thank you mark! you are awesome!

[jzpower&associates]

hey mark have you shipped the wastegate yet?

[eblick99]

hey i got a question to throw in here. i have an XS 50mm, and need a new spring for it. time to run some real boost. do you have a 10 or 12 psi spring for the 50mm? if so i want one.

[98mkiv]

hey i got a question to throw in here. i have an XS 50mm, and need a new spring for it. time to run some real boost. do you have a 10 or 12 psi spring for the 50mm? if so i want one.


We do, but don't change the spring, just run a boost controller.... what is your CR?

Thanks
Mark

[eblick99]

CR is now 8.7:1 :) and i got rid of the distributor and timing spike, so its nice and smooth.. and best of all boost friendly. I pulled the NA-T and dropped in a GTE actually. It has an XS single mani on it, but ide like twin T3's on there.... when's the XS Power twin T3 turbo kit for the GTE coming out?? ;) ill need a new spring, the one in there is a 5.7 psi spring. so even with a boost controller i wont be able to run 12-20 psi. Ill be using your T57 with a .68 a/r hot side or the T61, depending on street or strip. now that it only takes a few minutes to switch turbos and set the fuel controller.

[jzpower&associates]

Hey Mark did you ship my wastegate yet? I haven't received it yet and its been a week i think...

[98mkiv]

shipped on the 10th.... give it till tuesday/wed (mon is a holiday)

mark

[jzpower&associates]

thanks mark, appreciate it!

[eblick99]

should i give you a call about a 10 or 12 psi spring Mark for my 50mm? or just tell me how much and ill paypal it to you now with my address etc.

heres my new motor...first pic of it online (doesnt look like much beyond a stock GTE, but it has crower valve train and single conversion, .60/.68).

http://i26.photobucket.com/albums/c115/eblick99/Lexus%20sc300%20GTE%20swap/DSCN0248.jpg

[cmedrift]

yea i need a HKS 50mm 5.7 psi wastegate spring as well

[98mkiv]

5.7 psi? my lawnmower runs more boost than that.

email me what you need for the XSPower gate and I can get it, springs are $30 each, shipped. I need to know if you have the GE or GTE gate and what PSI you want.

Thanks,
Mark

[eblick99]

theres a GE and GTE gate? i have no idea which one i have. 50mm HKS style, and i think it has two ports on top.

http://i26.photobucket.com/albums/c115/eblick99/lexus%20sc%20turbo%20work/DSCN0061.jpg

[98mkiv]

is that on your GTE or your GE manifold?

[eblick99]

GTE mani.

[98mkiv]

got what you need.... I am travelling today, 12psi, right?

[eblick99]

correct-a-mundo! 12 psi would be great. then if i want more ill use my boost controller to tighten the spring.

[98mkiv]

OK, can do.... BTW, you don't need to replace the spring at all if you have a (manual/electronic) boost controller.

[eblick99]

yeah i just want to run 12 psi off tha gate then if i go higher run the BC.

[jzpower&associates]

thanks mark for the wastegate! awesome service!

[eblick99]

where do i paypal the money to? send me a PM Mark how you want to do this

[98mkiv]

paypal is jmmx22@hotmail.com --- I need to check stock on 12 psi first...

Thanks,
Mark

[eblick99]

ok just let me know when you have it in stock and ill paypal you. also post the total to send...

[98mkiv]

in stock.

[eblick99]

ok payment sent!