PDA

View Full Version : Sc300 Intercooler Setups?

Last5Spd
08-22-2005, 05:43 PM
ok guys.. lets see some SC300 Intercooler setups... Just sc300's no supras..

iam gonna do a na-t so i was wondering whats everyone running
Brown Duckz
08-22-2005, 05:46 PM
Boost Logic is probably the best...
scnat
08-22-2005, 05:53 PM
spearco
dejacky
08-22-2005, 09:44 PM
Supra MKIV TT SMIC :drama:
SupaSupraSE
08-22-2005, 10:16 PM
HKS, Greddy, supra TT IC, Spearco, BL, and ebay intercoolers are pretty much what everyone uses.
conundrum07
08-23-2005, 01:12 PM
Anybody ever try fitting an intercooler with the outlets on the same side like the MKIII uses? Seems like it would cut down on piping.
Idrewfelix
08-23-2005, 02:21 PM
Anybody ever try fitting an intercooler with the outlets on the same side like the MKIII uses? Seems like it would cut down on piping.

That would be a poor choice because when the inlet is close to the outlet, the incoming air will be heated, which defeats the purpose of an intercooler.

Best method is to keep the outlet away from the inlet as far as possible, therefore utilizing the intercooler's main properties.
conundrum07
08-23-2005, 08:06 PM
That would be a poor choice because when the inlet is close to the outlet, the incoming air will be heated, which defeats the purpose of an intercooler.

Best method is to keep the outlet away from the inlet as far as possible, therefore utilizing the intercooler's main properties.

Im referring to a vertical flow intercooler.
aliga
08-27-2005, 08:08 AM
bl ic kit

http://www.elit3.com/upload/IMAGE5.jpg
dejacky
08-27-2005, 08:11 AM
Apparently you can use this much of the stock SMIC piping (rest needs to be fabricated):

http://i19.photobucket.com/albums/b188/dejacky/SMICpiping.jpg
96sc3
08-28-2005, 01:12 AM
tt intercooler,,,,,
Supra4ever
08-28-2005, 01:19 AM
Anybody ever try fitting an intercooler with the outlets on the same side like the MKIII uses? Seems like it would cut down on piping.
Yes, you could, not recommended

http://www.promotionsupplies.com/temp/ebay/IC/31x12x4oneside/31x12x4oneside_f.jpg
2jzget
08-28-2005, 02:34 AM
Yes, you could, not recommended

http://www.promotionsupplies.com/temp/ebay/IC/31x12x4oneside/31x12x4oneside_f.jpg

Why not the you have a valid reason, other than looks
conundrum07
08-28-2005, 01:22 PM
This is what I am talking about:

http://i9.ebayimg.com/02/i/04/a0/a0/b7_1_b.JPG
Supra4ever
08-28-2005, 10:52 PM
This is what I am talking about:

http://i9.ebayimg.com/02/i/04/a0/a0/b7_1_b.JPG

This is 100times better, it should be perfectly fine.
96sc3
08-29-2005, 12:36 AM
where can i get these IC's , the ones with the same side in and out, thanks
soarerflame
08-31-2005, 09:36 PM
SPEARCO Intercoolers

Spearco (http://www.turbocalculator.com/sale-intercoolers.php)