need help on replacing the stock twins

[dainese954]

after dropping the motor in my car and started it up my stock turbos went. so now i need to replace my stock twins. how hard is it? how long will it take? whats the best way?

[Brown Duckz]

after dropping the motor in my car and started it up my stock turbos went. so now i need to replace my stock twins. how hard is it? how long will it take? whats the best way?They pretty much come off as one unit, and go on the same way.

[got_trd]

take the intake off, take all the piping that goes to the turbos off, remove the heatshield, disconnect the coolant lines and oil lines, disconnect the vacumm lines, Unbolt one side of the ypipe on the exhaust side of the turbos, take the front turbo/manifold off together, take just the rear turbo off (leaving the manifold on).

Thats pretty much how its done on the 1jz twins. 2jz's look a little more complicated but you get the idea. Leave the rear manifold on because its a pita to take off/put on. Good luck

[98mkiv]

take them off and shit can em' and put on a single kit....

[Bean]

take them off and shit can em' and put on a single kit....
:werd:

[2jzmk3]

take them off and shit can em' and put on a single kit....


agreed

[Arizona]

I say go ssingle as well(thats what I did) If not replacing isnt hard its just tedious(i changed mine with the motor out..Way easier) If u need replacment turbos I have a set a long with all the other stuff(manifolds o2 housing downpipe etc..) throw me PM for a price. I'll sell em for peanuts,