SWAPPING SC300 ENGINE into SUPRA

[skyline18]

I needed a new 2jzge, so i bought the engine and tranny from a sc300. aside from the ecu and engine harness being different (the engine is NOT VVTI) is there anything i need to know about putting it in? any issues like different injectors or anything you can think of that i might need to buy at all to make it work that i cant use off my old engine? and as a heads up the old engine got a real bad knock in it, so the external parts are fine aside from a shitty alternator. thanks guys and YES i did look around but this is a 2jzge to 2jzge swap, i havent seen the question pop up yet in the forums at all.

[skyline18]

honestly is there no one who can help me with this?? i mean is it that hard to help?

[xspsi6]

Yes they are the same and the swap is very simple there may be a few sensors that are diffrent but other than that it is cake. Just drop it in and figure everything out as you go.

[Bean]

If you have the stock Supra harness, I would just use that, because everything on the engine plugs in. Its the body harness plugs that are different between the two.

[skyline18]

thanks guys its in, and running, but there is a problem with the shift lever. its auto and not moving. must be a bad solenoid or a sensor isnt telling it the car is on and the brake is pressed. happens sometimes in my accord, hopefully that's it

[skyline18]

i think i shorted out some of the fuses in the car. does anyone know which fuse controls the power windows??? i looked on my friends manual supra and it didnt say WINDOW or anything. where is the power window fuse located, or is it a relay?? anyone have a diagram?

[skyline18]

It Is Done!!!! Engine Is Running Smooth, Windows Work, Translock Has Been Fixed, Compression Has Been Lowered, I Am Driving A New Beast!!!!

[xspsi6]

post some pics.

[skyline18]

dont know how, but ill figure it out and post them soon

[Bean]

Nice job! Seeing this gets me motivated so I can go pull the head off my car and replace it

[skyline18]

what happened to your head?

[Bean]

apologies on the late reply:
I warped the fudge out of it :) Lower rad hose got a huge cut in it on the interstate and out went all my coolant. I didnt know it was happening and before I knew it, my car was full red with a check engine light on. Pulled over and even after I repaired the hose, it was burning coolant like no tomorrow.

Finally got it done. Took a popped freeze-plug in the Nissan to get my ass off and finish it in 2 days. I had to have transportation for school :D

[skyline18]

ahh, so freak accident i suppose. i was wondering what happened but thanks for the reply. sorry that happened.

[LexusFTW]

so what was up with the windows and the shift lever?

[skyline18]

all good now it was a fuse. but windows out again. ima check that fuse otherwise i think the motors out.

[98mkiv]

have you figured out the pic posting thing?

pretty easy, just resize them first.