PDA

View Full Version : FS: 1995 Supra APU


jts2005
11-24-2007, 03:29 PM
1995 Toyota Supra Turbo
~100,000 miles
White/Black
Targa Top Automatic

Here's a rundown of the cars current state:
Engine:
- Precision 67dbb a/r .81 with compressor surge cover ~4k miles on it
- Boost Logic oil feed/return kit
- Greddy 3-row FMIC
- Apexi GT-Spec exhaust
- Greddy Type-R BOV

Electronics:
- MAP-ECU Piggyback system [will include laptop]
- Greddy Profec type II
- AEM UEGO wideband
- AEM tranny temp. guage.

Drivetrain:
- Boost Logic transmission with 3800 stall
- Derale Electra-Cool Remote Fluid Cooler, 10 in. x 12.5 in. x 4 in. Cooler, 10 in. Fan
- Stock tranny on hand and will be included on purchase

Suspension/Wheels/Rotors:
- Eibach lowering kit
- Koni gas shocks
- Ruff Racing 279's 18x8.5, 18x9.5 [just purchased 11/6/07 with new tires]
- Stock TT wheels included
- Sloted rotors installed on vehicle, but will include brand new stock rotors

Misc stuff done:
- New valve stem seals…done this past summer
- New power steering pump
- Weather stripping around targa top and doors have been replaced…no leaks!
- 97/98 turn signals
- HID kit 4300k

Misc things included:
- 52mm dual A-Pillar
- Stock wing
- Fuel rail sold by cowboy bebop
- 97/98 crossbar for front bumper
- Autometer boost gauge (had it in car when bought)

Priorities in my life have forced me to sell my car to start up a business. Overall the car runs great and is very reliable. The Boost Logic transmission has a very hard and firm shift, but this is normal. I also will include the original transmission which runs perfectly fine. The windows were tinted (5%) when i bought the car from Hi-PSI. The leather seats are the original seats and are in good condition (pics soon).

There are a few things that need some work. The front bumper needs to be replaced as the previous owner molded the stock lip to the bumper. I was going to replace the bumper with a MVP lip. There is some rear hatch rust on the lower windshield that needs to be repaired as well as a few minor scratches here and there from normal driving. The holes in the trunk are just filled temporarily and I can reinstall the wing in a few seconds. The car was repainted before I acquired it and to be honest it wasn’t the best job but it does look good. The only other thing i can think of off hand - Speed sensor code #42 is showing...haven't had time to fix it, but it's an easy job.

Asking $23,500 or $21,000 with stock tranny and rims.

I am located in West Palm Beach, FL. If you have any question please don’t hesitate to ask and I will try to answer your questions promptly. please email me at ihiustler@aol.com as i check this daily from my phone while i dont have internet access at work.

Please only comment if you are interested!!!

I will have pics of the engine bay and interior very soon. i just wanted to get it listed.


http://img215.imageshack.us/img215/6771/img2603lc6.jpg
http://img259.imageshack.us/img259/6182/img2604hz8.jpg
http://img219.imageshack.us/img219/6402/img2605lk5.jpg
http://img219.imageshack.us/img219/4986/img2607gx8.jpg
http://img215.imageshack.us/img215/4093/picture024ou3.jpg
http://img259.imageshack.us/img259/2421/picture021oj6.jpg
http://img219.imageshack.us/img219/3598/picture022lg2.jpg
http://img219.imageshack.us/img219/669/picture023sk2.jpg
http://img259.imageshack.us/img259/7066/picture025oa7.jpg
http://img219.imageshack.us/img219/1483/picture026cx5.jpg
http://img219.imageshack.us/img219/8927/picture027yp5.jpg

98mkiv
11-26-2007, 10:31 PM
how about the money shot.... the engine bay?

hockyplyer18
12-18-2007, 04:00 PM
sold sorry guys