CLNSC3
03-21-2008, 11:09 PM
I am building this car for a buddy of mine, we found it for $600 in "Running" Condition. I have always loved this body style, and this generation of Toyotas in general.
http://i31.tinypic.com/27ybv6f.jpg
http://i32.tinypic.com/2ikqgcl.jpg
http://i32.tinypic.com/23ixe0z.jpg
http://i30.tinypic.com/vgh939.jpg
http://i30.tinypic.com/257kbib.jpg
Above you can see the stock engine in all of its glory. Before you ask, no the 1JZ is not going to drop in. We are cutting part of the fire wall and tranny tunnel out and fabricating an entire new piece. The engine compartment is approx. 29.2 inches from firewall to the radiator, the 1JZ is very close to that number as well.
I got a MKIII Supra 1JZ w/ R154 to install in the car. We are fabricating a driveshaft, and mounting an AE86 rear end under the car. The factory rear end was tiny, didnt have lsd, had drum brakes, and likely had a number of other problems that were not worth dealing with.
We are trying to keep this as cheap as possible, I am using the stock front brakes from my SC as they are much bigger than the stock pieces on the corona. I am front mounting an eBay wrx top mount intercooler with custom end tanks.
This project is going to require an amazing amount of fabrication. Nothing is going to bolt right up and make life easy. Luckily I enjoy a challange, and the final product will be quite the machine. We are keeping it close to stock, a few BPU mods, anyways onto more pics....
http://i30.tinypic.com/jv11cj.jpg
http://i29.tinypic.com/fdy1yh.jpg
http://i29.tinypic.com/21eq05i.jpg
http://i27.tinypic.com/2mfi9i.jpg
I am just getting started on the build, I have my own project going on, a job, and a business to run so needless to say I don't have much time to dedicate to it. I will update this thread as I make more progress building this car!
Josh
http://i31.tinypic.com/27ybv6f.jpg
http://i32.tinypic.com/2ikqgcl.jpg
http://i32.tinypic.com/23ixe0z.jpg
http://i30.tinypic.com/vgh939.jpg
http://i30.tinypic.com/257kbib.jpg
Above you can see the stock engine in all of its glory. Before you ask, no the 1JZ is not going to drop in. We are cutting part of the fire wall and tranny tunnel out and fabricating an entire new piece. The engine compartment is approx. 29.2 inches from firewall to the radiator, the 1JZ is very close to that number as well.
I got a MKIII Supra 1JZ w/ R154 to install in the car. We are fabricating a driveshaft, and mounting an AE86 rear end under the car. The factory rear end was tiny, didnt have lsd, had drum brakes, and likely had a number of other problems that were not worth dealing with.
We are trying to keep this as cheap as possible, I am using the stock front brakes from my SC as they are much bigger than the stock pieces on the corona. I am front mounting an eBay wrx top mount intercooler with custom end tanks.
This project is going to require an amazing amount of fabrication. Nothing is going to bolt right up and make life easy. Luckily I enjoy a challange, and the final product will be quite the machine. We are keeping it close to stock, a few BPU mods, anyways onto more pics....
http://i30.tinypic.com/jv11cj.jpg
http://i29.tinypic.com/fdy1yh.jpg
http://i29.tinypic.com/21eq05i.jpg
http://i27.tinypic.com/2mfi9i.jpg
I am just getting started on the build, I have my own project going on, a job, and a business to run so needless to say I don't have much time to dedicate to it. I will update this thread as I make more progress building this car!
Josh