PDA

View Full Version : Out tuning


t66sc3
04-02-2008, 10:45 PM
Well i just went out and did a little bit of tuning to get drivability down to run low boost which was 6psi off of the spring and see what problems arise. I only went out for about 20 mins going for a coffee seeing who else was around.
After i dropped my friend off he pulled up to the same light getting onto the highway (his car is a 05 evo full bolt ons stock ecu running 19psi) light turns green and i wouldnt go from a dig so as were lining up a 350z pulls up in the third lane. Well we went on three honks from 30mph and we bolth walked away from the 350z, i pulled untill middle of third gear then the Evo took me by about 3 cars after that.
So this may be in the wrong topic but i put together a budget turbo kit which cost me 1200 and put it on my stock 1992 sc300 which cost 2500 compared to the prices of the other cars im verrrrrry happy with the outcome and shall be turning up the boost to 12psi next week.

oneforspawn
04-07-2008, 04:00 AM
what are you using to tune, im stuck at a point where i dont want to jump into the turbo scene without know what to tune with and how really.

98mkiv
04-07-2008, 07:22 AM
Nice.... :)

t66sc3
04-07-2008, 09:05 PM
It was just a basic setup i retarted base timign a little bit got a SAFC2 and wideband and TT fuel pump

armyastro
04-07-2008, 09:12 PM
how far did you retard it and was it a full retard or adjustable cam gears? and are you running stock compression..if so i wouldnt turn it up without some sort of compression drop and headgasket. you are going to be tearing it apart and rebuilding it if you do so why not just tear the head off and do it now for far cheaper.:dunno:

t66sc3
04-07-2008, 09:22 PM
i retarted base 3* and had it up to 12psi the safc wasnt readign to much knock and the wideband was still on the rich side so it was fine for stock compression, the car is dead now i blew a line to my catch can just because i opted to use a old hard hose and the car caught fire

armyastro
04-07-2008, 09:31 PM
so this is the burned up sc?? i need the bottom block... you have it still.. i want to make my 1jz a 1.5jz 3.0

t66sc3
04-07-2008, 09:34 PM
yea thats me yea i have it but i dotn know how to get it to you