FIC issue

[scslider]

I installed my fic today, the car runs fine with the flying lead harnest but will not idle with the fic connected. I can keep it running with my foot on the gas but it is misfiring bad. Shouldn't it run with no issue with no adjustments.:dunno:???

[ElitistK]

so does the car start up at all with the fic connected?

[scslider]

With the fic connected the car starts and stalls, but if I give it 1/4 throttle 2500 rpm misfires and sputters.

[scslider]

I'm good, looked at another thread and found that the crank sensor is the only signal needed. So I took the cam signal out if the system and the car starts. everything is good.

[ElitistK]

wait what car do you have?

i have the cam signal and crank signal hooked up.

[scslider]

97 sc300. It has a distributer. (g1 and g-)

[ElitistK]

^ i see what you did there. Your engine has no cam sensor.