I tried hooking up SAFC to 95tt. Turns out to be JDM motor/wiring. Now what?

[artbran]

As the title says, I tried hooking up the SAFC that is built into the 95tt that I have. When I was installing it, I came across the last 2 wires. The yellow I believe was to go to the ECU side of pin #66 while the white was to go to the car side of that wire (cut wire in 2).

So there is no pin #66 which I found out leads to the MAF which I dont have meaning my system runs on a MAP sensor.

So My dilemma is that I have the white and yellow wires and dont know what to do with them. Any ideas?

I posted on SF and not many people know what to do..

LOL love buying cars that are "built"

[artbran]

never mind.. Think I found it..

[LexusFTW]

How did you solve the problem?

[artbran]

Its the JDM motor with the JDM wiring harness. You connect it to pin #45 the same way that you would do so with pin #66.

Since its the JDM motor, it doesnt have a MAF but a MAP rather. You have to splice into that.

[LexusFTW]

Thanks for the update :)