fic problem, need cam and crank ecu loaction

[davi99]

alright, i finished car. but im having problem starting the car, it wont crank over. ive tried the reverse lead harness, but would not crank over. i used jeffs wiring diagram wire the fic. double check my wires. but i was not pretty sure on the crank and cam sensors wire. thats probably the problem. does anyone have like a 98 gs300 wiring diagram for the cam and crank.

[magsupra]

Best to find a full pinout diagram for your ecu. If you find +/- pinouts for crnk and cam, its mag type. if there's only one pin for each sensor, then it's hall.

if the GS is a mag type there should be a set of 2 wires for each sensor that need to be intercepted , and 4 wire intercepts to be made for each set. Pay close attention to the FIC side used and ECU side wire used as there are -/+, Mago/Magi. the details are in the manual.

if it's hall type, much more straight forward.