kmn5
11-10-2005, 12:40 AM
FMIC 31x12x3 $250
inlet outlets are 2.5"
It came off the front clip of a S14 silvia, the sr20DET motor was swapped into a 240sx, and the fmic was left over, it's really big, and would have required deletion of the front bumper beam in the 240sz project my friend has.
has a slight dent on the bottom, but it does not affect internal flow as the bottom tube is not affected, only the colling fins below it are slightly pushed in.
It says "BLITZ" but I doubt it's real cause the Blitz ones have the word Hybrid stamped on the top of the fmic
http://mysite.verizon.net/vze27mym/sitebuildercontent/sitebuilderpictures/blitz1.jpg
http://mysite.verizon.net/vze27mym/sitebuildercontent/sitebuilderpictures/blitz2.jpg
http://mysite.verizon.net/vze27mym/sitebuildercontent/sitebuilderpictures/blitz3.jpg
http://mysite.verizon.net/vze27mym/sitebuildercontent/sitebuilderpictures/blitz4.jpg
inlet outlets are 2.5"
It came off the front clip of a S14 silvia, the sr20DET motor was swapped into a 240sx, and the fmic was left over, it's really big, and would have required deletion of the front bumper beam in the 240sz project my friend has.
has a slight dent on the bottom, but it does not affect internal flow as the bottom tube is not affected, only the colling fins below it are slightly pushed in.
It says "BLITZ" but I doubt it's real cause the Blitz ones have the word Hybrid stamped on the top of the fmic
http://mysite.verizon.net/vze27mym/sitebuildercontent/sitebuilderpictures/blitz1.jpg
http://mysite.verizon.net/vze27mym/sitebuildercontent/sitebuilderpictures/blitz2.jpg
http://mysite.verizon.net/vze27mym/sitebuildercontent/sitebuilderpictures/blitz3.jpg
http://mysite.verizon.net/vze27mym/sitebuildercontent/sitebuilderpictures/blitz4.jpg