BoostedSupra
06-03-2009, 01:16 PM
Hey guys,
I have a couple of questions to finish my build, but here is some background first.
1993 Toyota Supra NA, 5 Speed, 80,000 miles, 2JZ GE.
1. I am having some trouble of finding some pics of where to tap into the oil pan, as well as how to remove it from a 1993 NA Supra, 2JZ GE motor.
2. I am also having a problem getting my Universal ebay 3" FMIC piping kit to fit on my Supra. I have tried a couple different ways because there are no instructions, but I WOULD GREATLY APPRECIATE PICS of how someone installed the eBay 3" FMIC piping. If anything I may have to cut some of it, but I'd rather not.
3. I also have a question on how to and how much to spark my NGK BKR5EIX-11 Spark Plugs for my Supra. I am going to be running a T67 at 9 psi to start. How much of a gap, .30 or .28?
4. Other than that so far I've replaced valve cover gasket, turboback installed, exhaust manifold with hks style wastegate installed, AEM UEGO installed, 550cc RX7 injectors installed in stock fuel rails, just used stock OEM NA Supra Injector "o-ring" seals at the firing end of the injectors. They seem to fit nicely in the fuel rail and all seem to line up.
I'm fairly confident in my ability to do the work myself, minus anything with timing, and welding, but I still need a few pictures to see where to finish off some stuff. Any help is greatly appreciated. Thanks.
Cliff
I have a couple of questions to finish my build, but here is some background first.
1993 Toyota Supra NA, 5 Speed, 80,000 miles, 2JZ GE.
1. I am having some trouble of finding some pics of where to tap into the oil pan, as well as how to remove it from a 1993 NA Supra, 2JZ GE motor.
2. I am also having a problem getting my Universal ebay 3" FMIC piping kit to fit on my Supra. I have tried a couple different ways because there are no instructions, but I WOULD GREATLY APPRECIATE PICS of how someone installed the eBay 3" FMIC piping. If anything I may have to cut some of it, but I'd rather not.
3. I also have a question on how to and how much to spark my NGK BKR5EIX-11 Spark Plugs for my Supra. I am going to be running a T67 at 9 psi to start. How much of a gap, .30 or .28?
4. Other than that so far I've replaced valve cover gasket, turboback installed, exhaust manifold with hks style wastegate installed, AEM UEGO installed, 550cc RX7 injectors installed in stock fuel rails, just used stock OEM NA Supra Injector "o-ring" seals at the firing end of the injectors. They seem to fit nicely in the fuel rail and all seem to line up.
I'm fairly confident in my ability to do the work myself, minus anything with timing, and welding, but I still need a few pictures to see where to finish off some stuff. Any help is greatly appreciated. Thanks.
Cliff