T61 XS power install from Finland

[sns]

Im dropping a XS power turbo kit in my Supra.

- T61 Turbo
- Virtual Works NA-T intake Manifold with 90mm throttle body
- 12x24x3" intercooler
- 3" intercooler pipe kit
- 3" downpipe
- 3" HKS exhaust
- 50mm wastegate
- SSQV bov
- Fuel pressure regulator (compare to aeromotive)
- 440cc 7mgte injectors
- AEM EMS 1101
- Compression ratio 9.2:1 (1.3mm HG)
- Walbro 255 fuel pump


I will upload pictures soon.

[sns]

How much power can i do with this kit?
and how much boost?
i drive my car on 98octane (RON 99.7, MON 87.9)


later im going to use 750cc injectors and devils own meth kit.

[Mr Ree NZ]

Apparantly the T61 is good for abour 25psi but your injectors wont cope with that. So probably about 12-14psi aslong as your tune is good.

What gearbox do you have?

[sns]

ok, good to know.
i have a Soarer R154 gearbox in it with a updated clutch.

i have a new AEM Uego wideband in my garage, do i need that with AEM EMS?
...im new to EMS... :)

[Mr Ree NZ]

you are very lucky to that gearbox, they are like rocking horse shit to find. Provided you get bigger injectors you could wind your boost right up without fear of breaking things.

You will need a wideband to tune it safely, I dont use AEM so cant be sure but I would guess the wideband will connect to the EMS somehow so it gets feedback on your AFR's just as my windeband sends feedback to the emanage ultimate.

[98mkiv]

run 10psi on 93 octane, until you change out your headgasket. Then you can increase the boost. Love the car.

[sns]

yeh i know those gearboxes ar really hard to find! i found one really cheap, the guy that sold it to me didnt know what he was selling :)
i am going to drop in 750cc injectors so i can boost more.


Mark -> 10psi? i have the TT 1.3mm headgasket.
cant i boost up to 17psi with that?
and how much hp will my car do with my setup and 750cc injectors?

[sns]

Here is a few days old picture from the enginebay when i testfitted everything...

http://i109.photobucket.com/albums/n77/staffeno/supra.jpg

[J. Cooper]

Lookin good. Keep up the work. Do you have any rear end work done?

[belement]

i was really confused when i that you were doing 440cc injectors with that crazy TB on the car... haha good to see u do have the thicker headgasket for more boosting, i have a pretty close setup to urs but in an sc300 with stock TB. Looks great

[sns]

Lookin good. Keep up the work. Do you have any rear end work done?

No not yet, im going to buy a LSD.

[sns]

i was really confused when i that you were doing 440cc injectors with that crazy TB on the car... haha good to see u do have the thicker headgasket for more boosting, i have a pretty close setup to urs but in an sc300 with stock TB. Looks great

i bought those 440cc injectors a few months back when i just wanted 300rwhp.
now im seekin for a bit more :)


Just bought 850cc Siemens injectors :)

[sns]

the car is now up and running.

Damn its fast, running it with 15psi of boost and 98 octane fuel.


Here is a pic of the engine bay
http://i109.photobucket.com/albums/n77/staffeno/suprakone1.jpg

Mods that i have on the engine for the moment:
- XS power turbo T60-1 (4" inlet)
- XS power turbo manifold
- XS Power 3" Downpipe
- 3" Exhaust
- 3" intercooler pipes
- 800x300x76mm Intercooler
- FFIM
- 90mm Throttle body
- 850cc injectors
- Walbro fuel pump
- 50mm Wastegate with screamer pipe
- TT Headgasket
- 1lbs under pulley
- TT camcovers
- AEM 9" air filter
- AEM EMS 1101 Engine Management System
- AEM 3,5bar Map
- AEM uego wideband
- Boost/oil pressure oil temp, water temg gauges.
- Aluminium 55mm Radiator
- 19row oil cooler / oil filter relocator kit
- 12" electrical fan

[domantas]

love it!

[2jzget]

the car is now up and running.

Damn its fast, running it with 15psi of boost and 98 octane fuel.


Yep boost sure wakes up the ole GE. Congrats

[domantas]

Did you used IAC (idle air control) on the intake manifold?

[sns]

Did you used IAC (idle air control) on the intake manifold?

No i dont use a IAC. works great without it.
when the engine is cold i just press the gas pedal a bit at startup,
and hold it at 1500rpm for 30sec. it idles great after that.

[Mr Ree NZ]

Really nice job you have done there, the TT cam covers and FFIM make it look so much cleaner as you can actually see the snail :)

Enjoy it mate ;)