Go Back   Club NA-T Forums Turbo Boost HP Car >
Specialized Forums
> [Archive Only] ExitSpeed
Register FAQ Locate Members! Members List Calendar Mark Forums Read



 
 
Thread Tools Display Modes

440cc, 550cc, 650cc, 750cc High Resistance Fuel Injectors
Old 05-08-2008, 03:23 PM   #1
EXITSPEED
ClubNA-T Advertiser
 
EXITSPEED's Avatar
 
Join Date: Jul 2006
Location: Wisconsin
Posts: 192
Trader Ratings: (6)
440cc, 550cc, 650cc, 750cc High Resistance Fuel Injectors

These RC Engineering Injectors are made to order, high-performance, electronic fuel injectors. RC injectors are great for high-performance/racing applications.

Qty 6, 440cc High Resistance Injectors with 6 Injector clips PM me for pricing

or

Qty 6, your choice of 550 cc, 650 cc, 750 cc High Resistance Injectors with 6 Injector clips PM Me for Pricing.


Note: OBD2 users may have to add another O-Ring to the bottom of the injectors so they seal properly (this was/is the hold up from posting these injectors. I have asked if this is correct but I couldn't get a straight answer yes or no from anyone).


I am also looking into other injector options as well. People looking for Low resistance injectors please PM or email me,


__________________
Email: Steve@exitspeedautosports.com
Paypal: PM me for it

Email or PM is the best way to contact me!

www.ExitSpeedAutosports.com
www.NonTurboSupra.com

www.NA-TSupra.com
www.SupraTurboKits.com


95 Supra NA-T - ETS Mani, ETS Downpipe, Turbonetices T60-1, Greddy BOV, Greddy Boost and EGT Gauges, Innovate XD16 Wideband Gauge, Innovate LC-1, Tial V44 Copper Top Wastegate, & and a few other goodies

Last edited by EXITSPEED : 04-16-2009 at 09:42 AM.
Offline:  

Old 11-20-2008, 02:12 PM   #2
chingpo05
2 psi
 
Join Date: Oct 2008
Location: texas
Posts: 74
Trader Ratings: (0)
so will we have to wire up a resistor box for this injectors??
__________________
i like em built not bought ; )
Offline:  

Old 11-20-2008, 02:53 PM   #3
EXITSPEED
ClubNA-T Advertiser
 
EXITSPEED's Avatar
 
Join Date: Jul 2006
Location: Wisconsin
Posts: 192
Trader Ratings: (6)
These are high impedance injectors, so you don't need the resistor packs.
__________________
Email: Steve@exitspeedautosports.com
Paypal: PM me for it

Email or PM is the best way to contact me!

www.ExitSpeedAutosports.com
www.NonTurboSupra.com

www.NA-TSupra.com
www.SupraTurboKits.com


95 Supra NA-T - ETS Mani, ETS Downpipe, Turbonetices T60-1, Greddy BOV, Greddy Boost and EGT Gauges, Innovate XD16 Wideband Gauge, Innovate LC-1, Tial V44 Copper Top Wastegate, & and a few other goodies
Offline:  

Old 11-20-2008, 11:50 PM   #4
chingpo05
2 psi
 
Join Date: Oct 2008
Location: texas
Posts: 74
Trader Ratings: (0)
ah ic so they are fully saturated.. sweet i may be picking these up in the future
__________________
i like em built not bought ; )
Offline:  

Old 11-21-2008, 03:00 PM   #5
EXITSPEED
ClubNA-T Advertiser
 
EXITSPEED's Avatar
 
Join Date: Jul 2006
Location: Wisconsin
Posts: 192
Trader Ratings: (6)
Sounds good. Let me know.

Have a great weekend.

Regards,

Steve
__________________
Email: Steve@exitspeedautosports.com
Paypal: PM me for it

Email or PM is the best way to contact me!

www.ExitSpeedAutosports.com
www.NonTurboSupra.com

www.NA-TSupra.com
www.SupraTurboKits.com


95 Supra NA-T - ETS Mani, ETS Downpipe, Turbonetices T60-1, Greddy BOV, Greddy Boost and EGT Gauges, Innovate XD16 Wideband Gauge, Innovate LC-1, Tial V44 Copper Top Wastegate, & and a few other goodies
Offline:  

Old 11-24-2008, 12:53 PM   #6
Dazzi
2 psi
 
Dazzi's Avatar
 
Join Date: Feb 2008
Location: England
Posts: 50
Trader Ratings: (0)
Direct fit then? I've seen loads of NA injectors about that claim a direct fit but turns out the stock clips don't fit!
Offline:  

Old 11-24-2008, 01:28 PM   #7
EXITSPEED
ClubNA-T Advertiser
 
EXITSPEED's Avatar
 
Join Date: Jul 2006
Location: Wisconsin
Posts: 192
Trader Ratings: (6)
No these are not direct Plug and Play. They will require injector clips.

For direct plug and play you may want to look into RX-7 Injectors.
__________________
Email: Steve@exitspeedautosports.com
Paypal: PM me for it

Email or PM is the best way to contact me!

www.ExitSpeedAutosports.com
www.NonTurboSupra.com

www.NA-TSupra.com
www.SupraTurboKits.com


95 Supra NA-T - ETS Mani, ETS Downpipe, Turbonetices T60-1, Greddy BOV, Greddy Boost and EGT Gauges, Innovate XD16 Wideband Gauge, Innovate LC-1, Tial V44 Copper Top Wastegate, & and a few other goodies
Offline:  

Old 03-02-2009, 12:12 AM   #8
2JZMKIV1
2 psi
 
Join Date: Sep 2005
Location: Austin, Tx.
Posts: 84
Trader Ratings: (0)
Quote:
Originally Posted by EXITSPEED View Post
No these are not direct Plug and Play. They will require injector clips.

For direct plug and play you may want to look into RX-7 Injectors.
So this will drop right into the stock NA rail and intake runners with the addition of the injector clips...?
Offline:  

Old 03-02-2009, 11:33 AM   #9
EXITSPEED
ClubNA-T Advertiser
 
EXITSPEED's Avatar
 
Join Date: Jul 2006
Location: Wisconsin
Posts: 192
Trader Ratings: (6)
The injector clips are used to wire the injector into your harness.

I also have another source for injectors now. they supply 340cc, 380cc, 440cc, 525cc, 630cc, 750cc stock high-z injectors and then 800cc and 900cc in custom modified super fast high z injectors.
__________________
Email: Steve@exitspeedautosports.com
Paypal: PM me for it

Email or PM is the best way to contact me!

www.ExitSpeedAutosports.com
www.NonTurboSupra.com

www.NA-TSupra.com
www.SupraTurboKits.com


95 Supra NA-T - ETS Mani, ETS Downpipe, Turbonetices T60-1, Greddy BOV, Greddy Boost and EGT Gauges, Innovate XD16 Wideband Gauge, Innovate LC-1, Tial V44 Copper Top Wastegate, & and a few other goodies
Offline:  

Old 03-31-2009, 09:25 AM   #10
J. Cooper
educate me
 
J. Cooper's Avatar
 
Join Date: May 2008
Location: Japan
Posts: 228
Trader Ratings: (3)
Hey Steve sir can you get ahold of any rx-7 injectors? ive been trying to but seems that all the rx-7 guys are trying to rip people off right now... damn economy.... wasnt sure if those 525s you have were the rx-7 ones?
__________________
1993 RSP Singled. Built. AEM V2.

Last edited by J. Cooper : 03-31-2009 at 05:11 PM.
Offline:  

Old 03-31-2009, 11:04 AM   #11
EXITSPEED
ClubNA-T Advertiser
 
EXITSPEED's Avatar
 
Join Date: Jul 2006
Location: Wisconsin
Posts: 192
Trader Ratings: (6)
let me see what I can find. New or used?
__________________
Email: Steve@exitspeedautosports.com
Paypal: PM me for it

Email or PM is the best way to contact me!

www.ExitSpeedAutosports.com
www.NonTurboSupra.com

www.NA-TSupra.com
www.SupraTurboKits.com


95 Supra NA-T - ETS Mani, ETS Downpipe, Turbonetices T60-1, Greddy BOV, Greddy Boost and EGT Gauges, Innovate XD16 Wideband Gauge, Innovate LC-1, Tial V44 Copper Top Wastegate, & and a few other goodies
Offline:  

Old 03-31-2009, 05:12 PM   #12
J. Cooper
educate me
 
J. Cooper's Avatar
 
Join Date: May 2008
Location: Japan
Posts: 228
Trader Ratings: (3)
It doesnt matter as long as they are in great shape. I know i will have to send them off to get tested for flow and everything, thats not a problem. New would be great but used will work. Thanks!

J
__________________
1993 RSP Singled. Built. AEM V2.
Offline:  

Old 03-31-2009, 08:03 PM   #13
EXITSPEED
ClubNA-T Advertiser
 
EXITSPEED's Avatar
 
Join Date: Jul 2006
Location: Wisconsin
Posts: 192
Trader Ratings: (6)
Do they have to be RX-7 Injectors? Also what size are you looking for? I understand the 89-91 RX7 turbo II were 550cc. There may be plug-n-play adapters that are available but I have to see if they will work with the injectors I have in mind.
__________________
Email: Steve@exitspeedautosports.com
Paypal: PM me for it

Email or PM is the best way to contact me!

www.ExitSpeedAutosports.com
www.NonTurboSupra.com

www.NA-TSupra.com
www.SupraTurboKits.com


95 Supra NA-T - ETS Mani, ETS Downpipe, Turbonetices T60-1, Greddy BOV, Greddy Boost and EGT Gauges, Innovate XD16 Wideband Gauge, Innovate LC-1, Tial V44 Copper Top Wastegate, & and a few other goodies
Offline:  

Old 03-31-2009, 10:44 PM   #14
J. Cooper
educate me
 
J. Cooper's Avatar
 
Join Date: May 2008
Location: Japan
Posts: 228
Trader Ratings: (3)
Quote:
Originally Posted by EXITSPEED View Post
Do they have to be RX-7 Injectors? Also what size are you looking for? I understand the 89-91 RX7 turbo II were 550cc. There may be plug-n-play adapters that are available but I have to see if they will work with the injectors I have in mind.
No sir they do not have to be the rx-7 ones. im looking for around 550s. I just need the simplest to install injectors possible and know that the rx7 ones are straight plug and play. Im mentally retarded when it comes to wires and such. Thank you for your research! keep me updated plz. If the adapters are pnp let me know.

Thanks again

j
__________________
1993 RSP Singled. Built. AEM V2.
Offline:  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 01:30 AM.


Sponsors: Boston Colocation + Boston VPS