Go Back   Club NA-T Forums Turbo Boost HP Car >
Tuning Electronics
> Stock ECU's
Register FAQ Locate Members! Members List Calendar Mark Forums Read

Stock ECU's Discussion of stock ECU and Hacks



Reply
 
Thread Tools Display Modes

DIY $30 Adjustable Boost Cut Eliminator
Old 01-06-2013, 11:38 AM   #1
ishootstuff
Spooling
 
ishootstuff's Avatar
 
Join Date: Jan 2008
Location: Arizona
Posts: 359
Trader Ratings: (0)
DIY $30 Adjustable Boost Cut Eliminator

I tried searching and I apologize if this is a duplicate post.

I take no credit for this, but I thought I'd spread the word. I built the circuit from the link below and it works great. I'm running 20 PSI on the GTE ECU and the AFR's are great and driveability is awesome. If you want to build and sell them, it only costs an additional $10 for each one because you have to buy a minimum of 10 quantity for some parts. No, I won't build you one.

Build your own FCD

To hook it up TAP into 12v and 5v cut the map signal wire.



Here's the list of parts I bought from jameco.com to do it:



Here's the guts of the project:

__________________
Naturally aspirated cars suck...

95 SC300 5 spd EMUSA T-61 turbo, GTE ECU, Innovate SCG-1 WBo2/EBC, TT HG, ARP Head studs, Dual HKS SSQV BOV's, DIY boost cut eliminator.

Offline:   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 11:51 AM.


Sponsors: Boston Colocation + Boston VPS