Go Back   Club NA-T Forums Turbo Boost HP Car >
Car Specific NA-T: Lexus/Supra
> NA-TT Discussion
Register FAQ Locate Members! Members List Calendar Mark Forums Read

NA-TT Discussion Discussion regarding swapping the 2JZ-GE for the 2JZ-GTE or 1JZ-GTE



Reply
 
Thread Tools Display Modes

1jzgte w58-r154 swap
Old 05-13-2007, 06:19 PM   #1
armyastro
 
Posts: n/a
1jzgte w58-r154 swap

ok after searching i cant find the answer to this. i have a 1jzgte now with a 5 speed w58 and the flywheel and clutch from my 2jzge.
i just found and bought a soarer r154 with bellhousing for 1k including shipping but no flywheel. can i use my w58 flywheel clutch setup or do i need to find a 1jz flywheel? and 1jz/mk3 turbo supra pressure plate/clutch thanks
  Reply With Quote

Old 05-14-2007, 11:23 AM   #2
gonesingle
20psi club
 
Join Date: Nov 2006
Location: CFL
Posts: 183
Trader Ratings: (0)
1JZGTE R154 flywheel and MKIII R154 clutch setup.

Flywheel:
http://store.driftmotion.com/product...uct_id_int=234

As far as clutches go? Stay away from XTD. Read this:
http://www.supramania.com/forums/showthread.php?t=43713


You'll also need to make a driveshaft. Easiest way, have a one piece made. Sound performance sells the SC300/MKIV 3 bolt rear end to MK3 4 bolt driveshaft adapter plate, and have Jawsgear make you the driveshaft, or anyone local that has the R154 input spline.

It's alot cheaper doing that then spending $1200 for a new Soarer R154 driveshaft from Toyota of Australia.

Last edited by gonesingle : 05-14-2007 at 11:33 AM.
Offline:   Reply With Quote

Old 05-14-2007, 02:09 PM   #3
armyastro
 
Posts: n/a
so i need a 1jz flywheel and mk3 clutch?? why wont my flywheel i have in it now work?? is the clutch plate splines different? and why cant i just buy the small front driveshaft??? it will fit wont it?
  Reply With Quote

Old 05-14-2007, 02:10 PM   #4
armyastro
 
Posts: n/a
oh and what about the slave cylinder... is it the same as a sc300 w58?
  Reply With Quote

Old 05-14-2007, 02:25 PM   #5
gonesingle
20psi club
 
Join Date: Nov 2006
Location: CFL
Posts: 183
Trader Ratings: (0)
Yes, 1JZGTE R154 flywheel only. The only clutch that fits is the MKIII R154 Clutch (or a soarer one from japan)

The slave probably won't fit, you might need a MKIII R154 one.

You can buy the Soarer R154 front half of the driveshaft and it fits from Toyota of Australia.... but that costs more then buying a new custom 1 piece.


I'll get you a price on that driveshaft.
Offline:   Reply With Quote

Old 05-14-2007, 08:12 PM   #6
gonesingle
20psi club
 
Join Date: Nov 2006
Location: CFL
Posts: 183
Trader Ratings: (0)
Here's the answer guys... brand new R154 Soarer driveshaft.

Hello Richard:
You can't buy the front half only, they don't sell it sepratly.Complet shaft
including center bearing. Price is $1790.00 Aus dollers($1500usd).Plus freight.
Thanks Richard.
Mohsen Shahbake
Parts Representative
Castle Hill Toyota
ph: 02 8831-8831
fax: 02 8831-8820

Last edited by gonesingle : 05-14-2007 at 08:15 PM.
Offline:   Reply With Quote

Old 05-14-2007, 09:18 PM   #7
armyastro
 
Posts: n/a
ok i just ordered a 1jz flywheel, and a r154 slave cylinder from driftmotion and a stage 3 mk3 turbo 6 puck clutch and the tranny that is coming has the cut rear yoke in the tranny still. i talked to jose at driftmotion and he said just get the measurement and get it welded to the sc300 auto and then install it all. i was looking at the small driveshaft coming out of the w58 trans i have installed and it looks like it is not inthe trans all the way and jose said the w58 sc300 shaft needs to be shortened just a bit. so i might be able to just take the splined end off hopefully and switch it out with the cut one and it will fit. i will go take a pic in a second and show what i mean

Quote:
Originally Posted by gonesingle
Here's the answer guys... brand new R154 Soarer driveshaft.

Hello Richard:
You can't buy the front half only, they don't sell it sepratly.Complet shaft
including center bearing. Price is $1790.00 Aus dollers($1500usd).Plus freight.
Thanks Richard.
Mohsen Shahbake
Parts Representative
Castle Hill Toyota
ph: 02 8831-8831
fax: 02 8831-8820
  Reply With Quote

Old 05-14-2007, 09:33 PM   #8
armyastro
 
Posts: n/a
http://picasaweb.google.com/armyastr...94321755287634
  Reply With Quote

Old 05-15-2007, 01:48 AM   #9
VGnomore
in vacuum
 
Join Date: Oct 2005
Location: Augusta GA
Posts: 14
Trader Ratings: (0)
Front half of an mk3 turbo driveshaft mates up to the stock rear section. That is what I am running
Offline:   Reply With Quote

Old 05-15-2007, 07:58 AM   #10
scottie G
scottie G
 
Join Date: Dec 2005
Location: lanham, maryland
Posts: 126
Trader Ratings: (0)
Thank U. So for a recap
7mgte clutch
7mgte flywheel
slave cylinder
I bought a Soarer tranny off a guy and he sent me the end piece off the drive shaft so that I wouldn't have to search for a drive shaft.
Offline:   Reply With Quote

Old 05-15-2007, 09:04 AM   #11
gonesingle
20psi club
 
Join Date: Nov 2006
Location: CFL
Posts: 183
Trader Ratings: (0)
If you need an auto driveshaft to modify, i have one with a bad front u-joint and a brand new carrier bearing that i just paid $150 to have installed, then the u-joint crapped out 500mi later. $100 shipped it's yours as long as you're in the 48 states.
Offline:   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 10:23 AM.


Sponsors: Boston Colocation + Boston VPS